HYDRAULIC PRESSES
Hydraulic presses
They exploit the oil pressure, through a pump which acts on the pistons which engage the operation of both the slide and the blank holder. The compression performed has values directly proportional to the oil pressure. They are particularly suitable for drawing, deep drawing and coining processes of blanked parts.
Hydraulic presses
swan neck
Characterized by a “C” structure which allows access from both ends to the work area.
Our range: from Kn 300 to Kn 4000.
Our models are available with the following features:
– mobile two-handed control panel,
– key selector for program selection,
– automatic shot counter,
– electronic counter,
– press stop device for reaching max oil temperature,
– monitored safety system of the safety hydraulic circuit,
– electric oil level,
– automatic lubrication of the guides,
– press pressure reference gauges,
– oil/air heat exchanger,
– optoelectric barriers to protect the worktop from the front,
– mechanical anti-fall locking of the ram at TDC,
– timer adjustable from 0.1 to 15 sec for minting time at PMI,
-HMI with backlit display, management of production parameters, strokes, pressure, speed, etc.
-separate lectern switchboard with safety PLC.
What can I make? Some examples of products
Hydraulic presses
double column
Characterized by a double upright “H” structure which determines a high strength and structural rigidity.
Our range: from Kn 1500 to Kn 5000.
Our models are available with the following features:
– mobile two-handed control panel,
– key selector for program selection,
– automatic shot counter,
– electronic counter,
– press stop device for reaching max oil temperature,
– monitored safety system of the safety hydraulic circuit,
– electric oil level,
– automatic lubrication of the guides,
– press pressure reference gauges,
– oil/air heat exchanger,
– optoelectric barriers to protect the worktop from the front,
– mechanical anti-fall locking of the ram at TDC,
-timer adjustable from 0.1 to 15 sec for minting time at PMI
-HMI with backlit display, management of production parameters, strokes, pressure, speed, etc.
-separate lectern switchboard with safety PLC.
What can I make? Some examples of products
Hydraulic presses
with 4 columns
The structures characterized by the 4 columns are designed to optimize the distribution of the loads and the relative tensions, in order to minimize distortions. The ram guide system ensures high precision in parallelism.
Our range: from Kn 300 to Kn 3000.
Our models are available with the following features:
– mobile two-handed control panel,
– key selector for program selection,
– automatic shot counter,
– electronic counter,
– press stop device for reaching max oil temperature,
-monitored safety system of the -safety hydraulic circuit,
– electric oil level,
– automatic lubrication of the guides,
– press pressure reference gauges,
– oil/air heat exchanger,
– optoelectric barriers to protect the worktop from the front,
– mechanical anti-fall locking of the ram at TDC,
-timer adjustable from 0.1 to 15 sec for minting time at PMI
-HMI with backlit display, management of production parameters, strokes, pressure, speed, etc.
-separate lectern switchboard with safety PLC.
What can I make? Some examples of products
